Recent content by Crashandburn

All I can post is brown snow and dead trees :confused:

Actually it's 4 screws to remove the foot...two screws to remove the power plug then three screws to remove the motor..just use needle nose pliers and gently pull the plug from the connector. DONT PULL BY WIRE! The motors are labeled on the connector A or C.

maybe he did the external memory thing??

I use a samsung note 4 with my bebops (power editions) I also fly a dji mavic mini that requires at least an android 6 to operate and use a 9...if I try to fly my bop using the 9 it acts all cattiwumpus :oops: Jim

When I suspect there is a mother board problem (as I do with yours) I replace the board but I get a "complete" board with the motor and antenna wires and cooling fan and sensors and led power light with the frame work everything is mounted on,it makes it real easy to swap out. I suspect that...

To make it simpler...with the drone front facing AWAY from you..the front/left and rear/right motors take the props that have a solid center piece and the front/right and rear/left take the props with the hole in the center. Jim

Is the controller a power controller? Black joy sticks and no white "stripe" around the antenna? The power edition charger puts out just a TAD more power than a standard charger..the battery will charge quicker but I don't think ypu'll damage it. Jim

I have broken an arm once or twice and have used super glue or gorilla glue. It works...for a while :-/ Best bet is a new cross frame.They can be found readily on ebay..used...new.."refurbished" ( tell me how do you "refurbish" a cross frame??) you can get one as cheap as $30usd. It isn't a...

power edition motors and "standard" motors are NOT the same

You can also get new batteries from sellers on Ebay..I have two power edition quads and made the mistake of getting a GiFi 4000mah instead of a Parrot 3350. Yes I got more flight time from the 4000,then the battery disconnected from the drone and it fell 100 feet from the sky and broke the cross...

Nope it doesn't connect by just the tablet...I just might replace the mother board,at least I have another Bop to fly..sighhhh. What connections should I look at? Antenna? Motor? I've repaired a couple of these things (replacing motors mostly) The MB might be shot because at one point I had to...

power edition

One of my PE crashed the other day,hit a tree branch and fell about 20 feet into a bush..soft crash :confused: Now it won't connect to the controller. I'm using a SC1 with a 10inch tablet. The Bop powers up and the cooling fan runs for ten seconds or so then shuts off and the light keeps...

Ok I'm not computer or internet savvy but I managed to get the app uploaded to my power edition. Thanks..NOW..what do I need for a scan card? Jim

Yes I know it is shouting...and I did it because I've been asking the same question and getting the same answer over and over..I just need to know HOW to connect the wifi to the drone for pete sake :-(