Recent content by AlexZh

After installing updates, I always make the first flight in a place where there are no trees, wifi, interference, electric lines. Today, during the first flight after updates at a distance of 110 meters, I received a message on the screen "strong WiFi interference". I already had this...

In the photo next to the trees road. ?

from another drone see Anafi in spruce trees hard. It is necessary to climb each tree at a distance of 5-6 meters from the point of the last flight and carefully watch them. If it is real

if he hit about spruce trees then he did not fall down. Is now on the tree. You can try to fly another drone at the same height and in the same direction. Maybe you will understand which trees you need to pay attention to searches.

In the program FF6 on the page "Data confidentiality ---> My flidhts" there is information about this flight?

Drone engines could shut down due to collision with an obstacle, birds ... If not enough time has passed, look at the place of the last signal transmission in FF6 and go to this place with the sky controller turned on. If the drone is turned on, you will catch its signal and see the image from...

- Do not put the drone on the snow, do not take off from the snow. Snow closes the sensors and the CPU cooling fan. Take with you a platform for takeoff / landing or take off from your hand

I fly at such temperatures. What to pay attention to: - go back home, so that when landing the battery charge was 30% - when charging batteries less than 50%, do not rise at the maximum speed and do not switch on the maximum horizontal flight speed. - warm the battery before flight

I flew at a temperature of 10 degrees Celsius below zero. Everything is good, but the flight ended at a battery level of more than 20% In the video, minus 10 degrees, the drone was long time outside, about 40 minutes

I had a similar problem during the last flight. The distance to Anafi is 184 meters. The drone did not execute the return home command, it hung in the air until I returned it myself. Before takeoff, I turned on airplane mode on my phone, the preloaded map of the area was not displayed. I think...

I had the same problem with Parrot Bebop 2. At 10 degrees below zero С, the battery instantly stopped working at about 25% charge. The frame and one engine were broken. Thinking this is a common problem for this type of battery.

Yes, this is a school. But the problem in flight and the error on the screen was and when I returned home. I fly at home often, before this incident and after there are no problems The reason was the calibration of Anafi. As soon as I did the re-calibration at home, the problem was solved

Had a similar situation with Anafi. The drone began to lose communication at a distance of 50 meters, on the screen the message "strong WiFi interference". Place the position of the drone in Africa. Problem started after the calibration of the drone, which I did poorly and quickly. After...