Flight Plan - On Anafi Ver. 1.8.0 / Skycontroller v1.8.0 / FF6.7.4 Mod FCC Batt

[sibujacob]

Hi,

I can confirm here that the latest firmware v1.8.0 on the Parrot Anafi / Thermal has got no glitch what so ever even with a standard Flight plan created using the esparus.online flight plan software. Even the battery seems to be ok and timed correctly ! Link to my Air data below

Aug 22nd, 2021 07:33PM | General / Overview | Parrot log 1.2 | Kuwait | Airdata UAV

 

[sibujacob]

sibujacob, is the esparus flight plan still working with the new 1.8.2 firmware? It does not work wit my Anafi, or Anafi Thermal anymore. Is yours still working?

Hi
I have my firmware @ 1.8.0. So it works . I have not updated as i didn't know there was a 1.8.2 !! What is the difference on this latest firmware

 

[BRC]

sibujacob, is the esparus flight plan still working with the new 1.8.2 firmware? It does not work wit my Anafi, or Anafi Thermal anymore. Is yours still working?

Hey jaja6009
I created a very basic esparus flight plan and tested this morning it is working on my standard Anafi with 1.8.2 fw.
I don't use often but did not notice any problems
What issues are you having?

 

[BRC]

I create a flight plan, uploaded it and then pressed start. Nothing. The drone just hovers.

Check out this thread sounds like it could be the same issue you are running into -
has to do with tilt of camera on take off - post #66

FreeFlight6 V6.7.4 on App Store

Congratulation highanddry, for me what you did didn't solved the issue maybe needs to do again I was those day trying find out any clue and yesterday he went to mission for me surprise What I had always since bought it, flight plant camera till setting never worked using FF6 self but If it...

parrotpilots.com

Good luck

 

[sibujacob]

I create a flight plan, uploaded it and then pressed start. Nothing. The drone just hovers.

Did you use the mod FF6 version or the original downloaded FF6 version .

 

[sibujacob]

then this should work on ver 1.8.0. Dont simply update these versions unless you have an issue.

 

[BRC]

I confirmed today Rodrigo del Pedregal findings regarding camera tilt preventing flight plan from initiating
If you place a tilt setting in same timeline slot as takeoff (1st position) then drone will just hover after takeoff
Remove tilt setting in takeoff slot - save and then reload plan it will work
It's ok to have tilt settings in all the other slots
btw - after you make the correction you may need to initiate plan twice - only after a failed takeoff
i.e, start plan (takeoff) and if it just hovers land drone and the start plan again
Same happens when creating plans in FF6 or on esparus, think it started with FW1.8.0
Very buggy - not sure how Rodrigo figured this out!