Recent content by djookenfold

Flew two full batteries yesterday, no issues with Yaw, did have an issue getting any GPS lock on the second flight post battery swap, pre flight. (exactly same spot as first flight (open field) Yes I did leave it for more than a minute, in fact it had depleted 5% of the fully charged battery...

More than likely, which is why I always calibrate when outside, I read somewhere that calibration was best carried out facing the Drone North!...no idea if that makes any difference, but I do this anyway. Also been suggested on this thread to re calibrate after full reset, correct me if I'm...

Not advisable to fly without GPS lock, however when ever I have experienced issue gaining GPS, flying up a few meters can sometimes then find a GPS signal. May not be appropriate in your case but worth a try?

Nearly 100 incedent free flights on FFS 6.52. Updated to latest FF6_6.6.0.1_FCC, install was perfect, updated firmware on both Anafi & SC3, Flight Plan & Follow Me, still appeared, all good. Unfortunately I now have the dreaded random Yaw issue, it has done this on each of the two flights in on...

First time using Touch & Fly POI, all went well except for a glitch shown in the video at approx 15s in. Any suggestion on cause?, conditions were breezy. flying to fast for the conditions? possible gust of wind?, I'm sure I've flown in breezier conditions without any sign of this issue. Any...

Oversight on my part, missed your comment on click on the reset, that worked fine, thanks again. Will note if any improvements.

Certainly has, it was one of the main reasons I chose the xiaomi mi5s. Originally wanted the Moto G4 but that does not have a "Real" compass i.e no Magnetometer

Calibrated the drone and it was as expected with the animation depicting the movement through the axis, however when calibrating controller, nothing, it just immediately states ready to fly.

No nothing like that which I though was a bit strange, based on other comments I expected to see instructions?. I'll try it again in a mo, off for a quick flight so will try it again prior to take off.

Ok so my experience of it is that I just click the calibrate button, it didn't ask for any actions to be performs at all, it just states, in green text "Ready To Fly"? odd.

Sorry I don't understand?, as per the screen shot of Calibration page from FF6 it says "You are going to calibrate the Controller". Is it even possible for SC3 controller to access and calibrate a phone /tablet Magnetometer / compass, does anybody know?

SC3 Calibration Screen shows Magnetometer Calibration. Wiki - "A magnetometer is a device that measures magnetism—the direction, strength, or relative change of a magnetic field at a particular location. The measurement of the magnetization of a magnetic material (like a ferromagnet) is an...

Hadn't given that a thought, I'll give it a try, cheers.

Possibly, however many phones no longer have a magnetometer, years ago virtually all smartphones did, but not the case anymore. I know this to be true when, two years ago researching for a new phone, I specifically needed one with a magnetometer so I could run a real compass as opposed AGPS...

Based on how stable the FF6 runs on my android, you may have point, most likely phone GPS loosing the plot