Recent content by Mark Mayer - Personal

I figured it out. Where wires are coming from the main unit to the camera, there is a small piece of plastic that protects the wires. I found that the wires were pinched underneath the plastic and restricted movement. I removed the protective plastic and it works fine.

I got it. thank you for your help. the issue was related to the position of the camera, but the point is that there is a small "half moon" piece of plastic to protect the cable which I assume is the camera data to be communicated back as well as the camera motor position. that cable was...

this is in trehonly angle the camera rests to.

how does the camera move? magnetic or mechanical?

still get camera error message - check that nothing is blocking the camera, then erestart your drone. i do t hat and same conditions occur.

under camera calibration - neither the horiztonal or gimbal calibration have any effect

how long of time is gimbal calibration?

I need to charge items. will work on later thank yuo

I have the password but it is trying to update but then asks for the password again. but I go to the general screen and it is connected to the ANAFI.

Yes I hit reset as nothing else worked. Back to anafi -xxxxxx.

just little frustrating and confusing. maybe I need to remove the camera from the drone and reset? maybe it moved somehow - have not tried that yet.

no change in the action of the camera movement. remains still. restarted, recalibrated, camera moves when drone started to initialize the camera action. but then nothing except notice on the phone that I need to restart the drone to help clear the alarm.

I did recalibrate the drone too. initially it did not request recalibration - but after I changed batteries it did request that activity.

correct. no lense cap or filter installed.

when I start up the unit, the camera does the rotation startup sequence, but then I get an error on my phone to restart the drone. also, the camera does not move up/down in view. any ideas? thanks.