Recent content by NortyNinja

I never had any problems with the motors all kicked in as should, No warnings in ffp, only the gimbals malfunctioning

I may not of had a come back on the two motor controller boards doesn’t mean they worked. I’ve sold cameras and gimbals separately of which I got good feedback on... The camera and gimbal are not connect in circuit in anyway only connected by plastic and screws. They are a separate entity so to...

You need a multimeter, they are cheap then will be able to help you further

Sadly they are not available. Your only option is to purchase a spares Anafi from eBay salvage the part, break it down and resell the rest for parts Recouping the cost

Sounds as if a short in the battery has damaged the charger, try another charger with the good battery, reset the battery by holding the button on for 15 seconds

I’ve sold a couple of motor control boards in the past not having a come back on them but having spent a couple of hours swapping these parts about only to test this problem the proof is in my findings, the gimbal electronics are only capacitors for the two motors nothing else, they are dumb, no...

If water has got into the lithium battery It’s had it, and rice does nothing but drying the containment’s in the water on the board shorting it out, wash the board not the battery in distilled water or rubbing alcohol with a toothbrush you maybe lucky

. Some information that maybe useful after seeing numerous threads on replacing the motherboard and resulting in camera problems. Having repaired a number of these I have accumulated a few spares and found time to swap around boards gimbals and cameras as you can see Stripping down the gimbals...

Haha I get that, I've hands like shovels and fingers like big toes, tho SMD works something I'm use to I shouldn't expect people to understand a couple of crappy photos Something like this really helps and tweezers Head glass £8-10 I will send better photos of it together and where to go to see...

There is another plug that may of come unseated inside the frame of the gimbal On the motor controller board below

Something to try If you'd like to open the top cover that covers the GPS antenna (2 screws has Parrot printed on it) then unscrew the gps antenna carefully resting it to the side leaving the thin coax attached to the board. Under that you will see the motor controller board (esc) fixed...

I myself like many others have briefly looked into this, I have a workshop for repairs to laptops, tablets and general smd electronics, I came by a couple of anafi main boards that were water damaged and repaired them, I still have them of which I think it's about time I played with one and a...

New to the Anafi, I have one on the bench having it taking a dive into the drink. Will post Pictures of the internals on a thread as I haven’t been able to find much if anything on line.