Recent content by Rodrigo del Pedregal

before you install the mod FF6 you need to follow this step Install first from Playstore, copy the ... \\ Android \ obb \ com.parrot.freeflight6 com folder to a safe directory, uninstall then the app. Install modded FF6, then copy back the saved folder to the ... \\ Android \ obb \...

Hi Paul, Where are you located?

Mazzim, There is one thing no clear to me 1. where are you located Europe or North America? 2. mod FFC_SE is for North America 3. mod SE is for Europe This has to do with Wifi frequencies Are you trying to use FFC_SE in Europe?

I have to correct what I mentioned before about saving setting . What works is to setup photo setting with FF6 , SC3 and anafi then remove the FF6 device but don't shutdown anafi ,you can close the SC3 and reopen ,the setting will stay only on anafi ,not what I said before in previews post...

It's looks like the motors are not getting the correct tension{volts} I have similar case with a small drone ,after one motor failed and replaced but keep going to right I measured the tension from motherboard into the new motor and it was quite lower than the rest

by the way I was also for more than a year taking photos and video without terminal I call it "blind flying" you learn to manage distances with your own eyes

I have tried to repeat the case .The Sc3 always saved the last configuration on it ,not in FF6 so thinking in that way I made a test 1. setup with FF6 the photo setting that I want to use with anafi connected to FF6 , then remove the FF6, disconnected the device and took some photos with just...

below the antenna left side you can touch it with something punctual to check if it turn off

Flight plan goes crazy Since a while after found the tilt issue with Flight plan it was working normal again but now since again something changed after last FF6 anafi firmware and SC3 The landing issue was solved, now Anafi land smoothly and normal, stabilization was also an improved Went to...

Parrot support is wasting time ,better to order spare part and replace the arms https://www.parrot.com/uk/shop/accessories-spare-parts/anafi/mechanical-kit about controller check for obstructions in the switch on,off bottom

amazing panoramas

Very nice panorama, I was thinking why so quite and just few people in the street , of course it is 7 AM ,haha

My excuses the line to the sky is in one of my computers ,so it is not on you panorama

I see, so the imperfection were created in FF6, but why do you just run the stitch processing in Kuula?

very nice views