Hello airgat007Hi all,
How to use ANAFI + Skycontroller 3 without terminal and directly shoot photo (and not preset automatic video) ?
Best regards,
Hi BRC,Hello airgat007
In the camera settings menu you can turn off automatic video recording during takeoff. Is this what you are asking?
Hi airgat007Hi Liger 1956
You are right. I don't want to have a phone or tablet connected to the controller.
I'm looking for this way to change video mode to photo mode without using any device, but Skycontroller...
Hi BRCHi airgat007
I’m curious as to why you would want to fly and take photos without a device connected to see what you are shooting?
Best regards
Hi jspg,I am also curious you do to fly without a display, you need to do some settings such as WB, ISO, shutter speed etc., when taking photos because of the different ambient light.
Hi Rodrigo,I have tried to repeat the case .The Sc3 always saved the last configuration on it ,not in FF6 so thinking in that way I made a test
1. setup with FF6 the photo setting that I want to use with anafi connected to FF6 , then remove the FF6, disconnected the device and took some photos with just SC3 ,everything was fine only I didn't take off due was inside but I think should works because of the setting are save in SC3
Ok, I confirm !!I have to correct what I mentioned before about saving setting .
What works is to setup photo setting with FF6 , SC3 and anafi then remove the FF6 device but don't shutdown anafi ,you can close the SC3 and reopen ,the setting will stay only on anafi ,not what I said before in previews post
Still couldn't take off very windy days