Recent content by Swordfish

Connection of the battery? It happen with mi original batery that is not good...now I am using an 18650 I will try with that today. Another thing that sometimes happen also with new battery is red light on the controller I have to turn it of and then it change to green

Yesterday I had a problem with the skycontroller 2. I have your upgrade for drone and skycontroller 2 black sticks (the new upgrade). I was about to fly and I was rotating the drone and suddenly the skycontroller light puts red and starts flashing and I lost connection with drone and the drone...

Ok thanks waldo, and do you know the name of the connector? Also Wich battery are you using? Did you change de skycontroller connector for xt60? Thanks and the last, the middle white of the sk2p is for charging in the controller right? It is not a telemetry thing? Thanks

Hello guys I just bought an18650 3.7v 7800mha battery for my sk2p (black sticks) and a battery holder for it, I have some problems. 1- The connector of the battery is not the same that I found in my country (but it connects someway), Wich is the name of that connector? 2- I have a hota d6+...

Hello guys Iam having problema yo balance Charge My bb2 batteries. I have just bought an hota d6+ and some custom cables that an ebay guy sold me. Thing is that i get an error in the Charger screen. The charging funciona works but without connecting the balancer cable to the Charger, but when i...

Wich balance Charger You recommend Mike?or wich one you are using? Thanks

Same problem here, did you solve ir?

For the PES you have to email solaris, and you must send him the drone serial and skycontroller serial. [email protected] that is the solaris e-mail

Mike i could connect to PES on both, skc2 and bebop 2. Left side is bebop, roght side skc2, thing is that the skc2 side is not like solaris video, Any idea? The above picture is mine, and the other is from the solaris video. Thanks mike

Hello again Mike i can't acces PES on skc2 i left an image. Another thing, You want the ceramic antennas? I could send to You if You want.

Hello Mike Thing is that i can't acces to the skyc2 with the adb thing (posted picture from solaris video) the ./adb doesent work for me. I have to install someting that refeer to adb? Thanks and sorry for bothering.

Hello mike I have an update of mi situation. Thing is that when cellphone not connected to skc2, it will beber lose conection betewen drone and skc2. But when i connect cellphone, it will randomly lose conection betewen skc and the bebop 2, there is Any whay that i could meassure the components...

Another one guys, how could i verify if all the chips that are close to the USB are fine? How could i meassure them with the tester?

I used a 100ohm resistor, too much? Sometimes the cellphone do strange things when connected

Yes leds are on in both boards. Another, the resistance mod, is the same if i do ir in the board or in the cable? One of My phones behave strange when connected to skc2 but if i connect to a PC ir works fine