"-RTH and flight logs can be deactivated"
This is not a new development. This always happens when the drone turns off and drops with a 20-30% battery ...
we were the beta testers
Verzonden vanaf mijn iPhone met Tapatalk
"-RTH and flight logs can be deactivated"
This is not a new development. This always happens when the drone turns off and drops with a 20-30% battery ...
Yes they still did not bother fixing the issue with logs only downloading to the phone on the next power up!"-RTH and flight logs can be deactivated"
This is not a new development. This always happens when the drone turns off and drops with a 20-30% battery ...
Not Brave.... was forced to updateThanks to the many brave souls who tested this first. I may do a test flight tomorrow on both of mine.
Now that you mention it you may be right on that. First two batteries I saw nothing out of ordinary, but third battery I saw all all 4 lights flash red in sequential order then to normal greenThere seems to be battery update too...after anafi+skycontroller update i did additional reset of sc3 and anafi(just in case),hooked up second battery to anafi and turned it on,immediately flickered red green light and then it went trough normal startup procedure.....now we just need brave soul to take anafi to 30 meter altitude and wait for battery to drop down to10%....?
Hello Grenze, can you please explain where you can read the FW version of the battery?
Thanks and regards
Not Brave.... was forced to update
a few hiccups on drone FW update as it did not want to complete on its own
ended up just unplugging battery as i think it was just hung up on reboot
It appears all is well as I flew 3 batteries down to 50% - no issues
Did have issues picking up GPS signal on ground, but up in air ok
I swear i saw at one time 28 satellites - thought there were only 24?
maybe my old eyes are old
Hard to read network setting as i could not see the actual channels
See post #6 on the thread belowHello dkokki, d95gas & Grenze,
how & where can I read out / recognize the FW version of my batteries?
See # 188 Pilot Grenze has FW 1.6.5 on all 4 batteries, how does he know?
Thanks and regards
Hello dkokki, d95gas & Grenze,
how & where can I read out / recognize the FW version of my batteries?
See # 188 Pilot Grenze has FW 1.6.5 on all 4 batteries, how does he know?
Thanks and regards
At dronebookSee post #6 on the thread below
Battery charging lights wondering
When I first bought the Anafi the battery would charge until all 4 lights were green. Then after a short period they would all switch off and I knew that the battery was completely charged. Now I have 5 batteries. The oldest one (about 1 year old) charges very slowly and the 4th light blinks...parrotpilots.com
Hello, I have had several flights now on new FW with battery mod 1.6.7 and have not seen any camera shackingGood evening guys,
has any problems with the new hardware FW Anafi 1.6.7 and FF6_6_7_1_FCC_SE_BATTERY.apk in the camera shake right left in the videos ?
My props is OK, I wrote because I see video at RTH shaking right - left and another guy had same issue and wrote at fb, but thanks for inform me. Maybe I must Calibrate againHello, I have had several flights now on new FW with battery mod 1.6.7 and have not seen any camera shacking
All seems to work well, very stable fights
Acquiring Satellite's seems to have improved
Maybe take a quick look at your props?