Flight Planner

[Blackcloud]

Hi,

I tried the flight planner today but it will not work, I get an error message saying calibrate drone. After several calibration I get the same message.

I have reset the drone / Mobile phone / turned of the controller but all I get is drone not calibrated.

has any one had this issue.

 

[Krusty Geeza]

This happens to me occasionally with my Anafi & not just in Flight Plan. About 1 in 6 or 7 times after I have calibrated the Anafi, it gives me a repeated message of the Anafi still needing calibration.

What I have found to work is to do the following when this happens:

1. Turn off the Anafi
2. Remove the mobile phone / tablet
3. Turn off / close the Skycontroller
4. Disconnect the tether cable (from phone to Skycontroller)
5. Open the Skycontroller
6. Re-start the Anafi
7. Wait for about 20-30 seconds
8. Plug in the tether cable
9. Attach your mobile phone / tablet
10. Open Freeflight 6 app
11. Download in the Freeflight 6 app the map for where you are
12. Turn mobile phone to Aeroplane mode
13. Calibrate the drone
14. Fly

I always bring up my Flight Plan after I am in the air & safe, making sure the Anafi is about 15 metres from me & at least 3 or 4 metres up off the ground.

 

[Blackcloud]

Hi pal,

Thanks for the info, I'll give your bullet points a try today.

I'll let you know what happens.