Hello All,
My name is Chris, I live in Rochester, Mn. I have dabbling in RC flight on and off for 10 yrs or so. Never had invested a lot of time or money until Covid and began putting considerable amount of more time and money and flight sim time into it and truthfully it has been trying at times. I have learned my lessons the hard way. Mistakes (some of my own making, ok, most of my own making), lack of hands on help from experienced pilots(as the group is small and unrealized by me here), and ego. Ego has been the most costly and the reason I am here today. I am stumped and hoping the wisdom of others can help me. I have had both Parrot bebop 1 and 2. I now have 2 bebop 1's, a Rotor Riot CL 1, a Diatone 3' cine, Diatone 3", and a couple other whoops and 3"ers. I enjoy the build process. All of which are riding the bench for various reasons, mostly hot soldering iron bungles(ego fed), but the 2 bebops are rebuilds and giving me troubles with the the firmware's of bebop and skycontroller 1 and either tablet, phone , or pc playing nice.. Nutshelling it, the skycontroller is running freeflight 3 ver. 3.3.xxx I believe, with firmware 1.6.6. Phone, tablet and pc(using blue stacks as emulator) all are running the lastest Freeflight Pro. I have gotten FFP from a few different places, Parrot, Google, and a couple more I can't recall right now, but all have netted the same results. I am guessing the SC1 was running 1.4.7 when I got it and it fought me but I got it updated to 1.6.6. The BB1's firmware is still unknown due to my problem. The SC1 will not update to 1.7.4(last number might be wrong), Therefore will not connect and get all 3 things talking. I've done most of what I could find online to no avail. After I send this off I am going to attempt updating the BB1 by SD card instead of trying to do it through SC1/FFP. Who knows, that could be it. Here are the steps I have taken(multiple times). Turn both SC1 and BB1 on, connect them through BB1 wifi. Then I connect SC1 to phone/tablet/pc through SC1 wifi, I open FFP, and I can see SC1 is connected but cannot get FFP to recognize BB1when FFP asks for the connection. I hope this all makes sense because it sounds right in my head, LOL. I am not so good at nutshelling so I am going to end this here and say thanks in advance for the help and welcoming me to the group. I will update after SD card attempt.
Chris Beste