One of my props spun-off at 40m, luckily a tree broke the fall. The battery and front nose seem to have taken the brunt of the impact. Rather happy to report that the drone is still in very good working condition. The damage list is:
I also tried the parrot main site and they directed me to the local dealer
So I found some BB motor cages for $AUD 20 and decided to give them a try. The magnets on the cages are noticeably smaller but after some test flights and monitoring they seem to be working fine.
Based on my research the smaller magnets mean the drone has less power and uses more electricity but until at this time I"m flying again.
I also grabbed the tool kit for the BB which has all the same tools for the BB2.
I'm still looking for a replacement nose, props, cages and batteries but am interested to see if any other parts from the BB will work on the BB2.
- Battery cracked, rear clip missing, bottom clips broken (surprisingly the battery still works fine but is not safe for flight).
- Front motor cage lost one of the prop lugs (the prop is missing as well).
- The nose piece was scratched up pretty badly but the plastic just pushed out and the electronics appear to be fine. There is a small nick on the glass in- front of the camera (this doesn't seem to have impacted the camera and you can't see the blemish unless you move the camera all the way up.
I also tried the parrot main site and they directed me to the local dealer

So I found some BB motor cages for $AUD 20 and decided to give them a try. The magnets on the cages are noticeably smaller but after some test flights and monitoring they seem to be working fine.
Based on my research the smaller magnets mean the drone has less power and uses more electricity but until at this time I"m flying again.
I also grabbed the tool kit for the BB which has all the same tools for the BB2.
I'm still looking for a replacement nose, props, cages and batteries but am interested to see if any other parts from the BB will work on the BB2.