Looking for the USB A board from a Skycontroller 3. I am in the Eastern US. Let me know if you can help.
Thanks.
Thanks.
Yes the four pins at the back are torn off the board.... its an extra for my backup bird so its not keeping me out of the air but two is almost always better than one. I was hoping that someone here is sitting on a mountain of spare parts and had one to sell.... but I will attempt to repair this week if no-one steps up.I assume that the USB socket has become loose on the board. If so it may be easier to either repair it yourself or get an electronics shop to repair it for you.
There is an earlier post showing the repair.... I have the board out of the controller now and am just waiting on a finer soldering iron to attempt it. It looks pretty straight forward and I will report back after.I have never repaired the USB port but some others here have I think. Without seeing the problem, or detailed photos, I cannot really offer any advice. You will need a fairly fine soldering iron, good eyes and a steady hand but provided that the tracks on the board are not too damaged it should be repairable. I believe that the USB board can be removed from the controller to minimise any damage to nearby components.
You could always buy a second hand controller and either pair that to your Anafi or just use it's USB board in your controller.