Anafi spinning without user input. Can it be fixed?

[AdrienR.]

Hello everyone I’ve had this problem for 2 years now and it got worse since then. The drone would spin on its own without any input from me and it is hard to get viable footage.
In the baseball park footage I had my controller down doing nothing, that was all the drone.

https://imgur.com/a/RQjUb2b

 

[Gipsz Jakab]

Hello everyone I’ve had this problem for 2 years now and it got worse since then. The drone would spin on its own without any input from me and it is hard to get viable footage.
In the baseball park footage I had my controller down doing nothing, that was all the drone.

https://imgur.com/a/RQjUb2b

Try recording a video of your drone with your phone while doing so. Float at eye level and record how the drone produces this phenomenon. Then it may turn out that the drone is moving or just a disturbance of the stabilizing system.

 

[AdrienR.]

Try recording a video of your drone with your phone while doing so. Float at eye level and record how the drone produces this phenomenon. Then it may turn out that the drone is moving or just a disturbance of the stabilizing system.

I will try, I notice it more with higher altitudes but I have seen it 5 feet above ground

 

[Jagerbomb52]

Not very scientific but I have seen this with higher winds at 200 feet where the Anafi does this. I have also seen this on one of my videos I was doing for how long the Anafi battery would last. That video I was only 3-5 feet above ground level but there was a strong cross wind and I believe that is what causes this to happen. Just my opinion and others have said it is related to firmware. We have to remember the Anafi is very light and strong winds can and will play a part in what happens to it.

 

[Chasbro]

Yep, gusty winds usually causes this. The old bebop 1 was bad about it. Funny you should bring it up, because I had a bad case of it the other day.