Myself and others have discovered that a simple, "drone only" case for the Anafi is nowhere to be found online. I was determined and came up with the following DIY. Enjoy!
I found this case for just under $12USD:
1. The case comes with a custom formed interior made for a different product.
Use a utility blade to cut along the top edge of the interior *** be careful not to cut through the shell.
2. I re-lined the inside with spongy shelf liner; avoiding the ends because it’s already pretty snug lengthwise.
3. To keep the drone from moving around I added foam pads to the sides to hold the “legs” in place.
4. Sealed the edges of the liner with hot glue.
I found a piece of black foam padding to replace the (found) green foam padding.
Used the green foam to create a bed for the gimbal, and a gimbal lock for good measure.
5. As snug as a bug in a rug.
The pix are numbered to follow the text and since and I’m taking pictures, I’ve included pix my kit (and caboodle).
I found this case for just under $12USD:
Hermitshell Hard EVA Travel Case Fits FUGOO Tough - Portable Waterproof Rugged Bluetooth Wireless Go Anywhere Speaker : Electronics
Hermitshell Hard EVA Travel Case Fits FUGOO Tough - Portable Waterproof Rugged Bluetooth Wireless Go Anywhere Speaker : Electronics
www.amazon.com
1. The case comes with a custom formed interior made for a different product.
Use a utility blade to cut along the top edge of the interior *** be careful not to cut through the shell.
2. I re-lined the inside with spongy shelf liner; avoiding the ends because it’s already pretty snug lengthwise.
3. To keep the drone from moving around I added foam pads to the sides to hold the “legs” in place.
4. Sealed the edges of the liner with hot glue.
I found a piece of black foam padding to replace the (found) green foam padding.
Used the green foam to create a bed for the gimbal, and a gimbal lock for good measure.
5. As snug as a bug in a rug.
The pix are numbered to follow the text and since and I’m taking pictures, I’ve included pix my kit (and caboodle).
Attachments
-
anaficasediy_1_removeinsert.jpg343.2 KB · Views: 28
-
anaficasediy_2_addinsulation.jpg485.8 KB · Views: 30
-
anaficasediy_3_formfitting.jpg416.2 KB · Views: 31
-
anaficasediy_4_securedgimbal.jpg658.4 KB · Views: 33
-
anaficasediy_5_snugasabug.jpg692 KB · Views: 34
-
apixelpilotkit-1.jpg582.8 KB · Views: 38
-
apixelpilotkit-2.jpg532.9 KB · Views: 34