I have bought Freewell kit but the camera when you start Anafi does not stay in the correct positionThe Freewell are the only ones that don't disturb gimbal initialisation.
So: expensive but best choice.
Then you belong to case A). See post #26!B) Press the Freewell filters firmly onto the gimbal! Then the initialization should succeed (but it didn't)
See my post # 26!For me the Freewell filters don't work with my Anafi
See my post # 26!
You belong to A)
The Freewell Filters work with almost every Anafi, because they don't touch the gimbal frame during initialization.I am not really sure that it is a weight problem. Those freewell filters are very light and the motors of the gimbal are quite powerful. But the fact that they touch the back once initiated might be the problem. I have ordered this and will see how they go. Not holding my breath but putting on and off the filters after gimbal calibration is a real delbreaker I would like to avoid at any cost.
https://www.amazon.es/Navigatee-Ultraligero-reducción-polarizador-protección/dp/B07JZ9G4TW/ref=sr_1_15?ie=UTF8&qid=1545488780&sr=8-15&keywords=filtro+anafi