No video feed on bebop when connected through sky controller 1.

[Moxy87]

Hi Everyone,

I’m looking for some advice, as new to this hobby and have encountered a slight issue with the video feed when connected to the sky controller.

I have a bebop 1 on firmware version V4.0.6 and a sky controller 1 on firmware version V1.4.10. The app says that the sky controller needs an update, but when I follow the update steps via USB drive, the sky controller boots straight to android OS and does not boot from the USB. Any ideas why the sky controller won’t recognise the USB drive?

I believe from reading other posts on this forum that the lack of video feed is due to the sky controller needing an update, but confirmation on this would be appreciated.

Thanks for you help

Adam

 

[Moxy87]

for the record this has now been solved. I Used a usb drive (1gb) in FAT32 format and copied the file from the link below onto it.

Skycontroller update - drone-forum.com

The one from the parrot official website was 27-28mb and did not work. The correct file should be 158mb from memory.

My skycontroller 1 connected bebop now has a video feed.

Hope this helps somebody in the future