Anafi Grounded
I've decided to repost this issue from General to here as it might possibly involve the new Software install
Jasper68Well-known member
JoinedJan 7, 2019Messages100Reaction score7
Yesterday at 11:48 AM
Add bookmark#2
Do engines start briefly and then cut out?
Reply
Report •••
W
wood_mcrMember
JoinedApr 13, 2019Messages7Reaction score0
Yesterday at 12:14 PM
Add bookmark#3
exactly, and after just 3s, before lifing up drone, they stoped
Like Reply
Report
Jasper68Well-known member
JoinedJan 7, 2019Messages100Reaction score7
Yesterday at 1:05 PM
Edit bookmark#4
This is what mine is doing...all started when I updated to latest FF6 . Since I've uninstalled and reinstalled every previous version of Free Flight about a dozen times. I've reinstalled props took apart and checked every connection.Re-set both Controller and Drone. Tried different cords different Phones and absolutely nothing works always same result everthing works perfect . Tried to hand launch it runs count down powers up It launches Flys everywhere out of control.
Reply
Report •••
Jasper68Well-known member
JoinedJan 7, 2019Messages100Reaction score7
Today at 12:40 PM
Add bookmark#7
ok so your saying one of the engines won't fire up when you press takeoff button or all engines fire up and then just quit making the Drone bunny hop for a couple of seconds
For issue I'm dealing with no reported engine failure pops up...nothing at all everything works perfect GPS, Camara, Calibration..etc I press takeoff ..all 4 props fire up to speed for about a second making Drone jump a bit then they cut out. I've checked and rechecked all connections installed and re-installed Software tried using different cords different Phones replaced all blades etc etc..all to no avail...
I need some help with this one..